The steel bars are used for manufacturing of crossbars, plate springs, fish plates, and blanks for component parts. A steel bar is widely used in the architecture for creation of ornamental finishing.
Hot-rolled steel strip bar of CIS
|
Dimensions of section, mm |
Product Standard |
Steel Grade |
Length |
|
b x h |
m |
||
|
20х4, 5, 8, 10, 12 |
DSTU 4747:2007/GOST 103-2006; GOST 7419-90 |
DSTU 2651:2005/GOST 380-2005: Ст1кп/пс/сп, Ст2кп/пс/сп, Ст3кп/пс/сп, Ст3Гпс/сп, Ст5пс/сп, Ст5Гпс, Ст6пс/сп, Ст6Гпс |
1.0 to 12.0 |
|
22х6, 8, 9, 10, 12 |
DSTU 4747:2007/GOST 103-2006; GOST 7419-90 |
DSTU 2651:2005/GOST 380-2005: Ст1кп/пс/сп, Ст2кп/пс/сп, Ст3кп/пс/сп, Ст3Гпс/сп, Ст5пс/сп, Ст5Гпс, Ст6пс/сп, Ст6Гпс |
|
|
25х4, 5, 6, 7, 8, 10, 12, 14, 16, 20 |
DSTU 4747:2007/GOST 103-2006; GOST 7419-90 |
DSTU 2651:2005/GOST 380-2005: Ст1кп/пс/сп, Ст2кп/пс/сп, Ст3кп/пс/сп, Ст3Гпс/сп, Ст5пс/сп, Ст5Гпс, Ст6пс/сп, Ст6Гпс |
|
|
30х4, 5, 6, 7, 8, 10, 12, 16, 18, 20 |
DSTU 4484:2005/GOST 535-88 category 1 -5, group I-III; TU U 27.1-00190319- 1318-2004 |
GOST 1050-88: 10; 15; 20; 25; 30; 35; 40; 45; 50; 55; 60 |
|
|
32х12, 18, 20, 25 |
GOST 4543-71: 40ХН, 45ХН, 15Х-40Х, 18ХГТ, 30 ХГТ, 12ХНЗА, 20ХНР, 20ХГНР, 20ХНЗА |
||
|
35x4, 5, 6, 8, 10; |
DSTU 3833-98(GOST 1435-99): У7, У8, У10, У12 |
||
|
36х6, 8, 10, 12, 14, 16, 18, 20 |
GOST14959-79: 55С2, 55С2А, 60С2, 60С2А,60С2ХА, 50ХГ, 50ХГА,65Г |
||
|
40х4, 5, 6, 7, 8, 10, 12, 14, 16, 18, 20, 25, 28, 30 |
60С2ХГ |
||
|
45х6, 8, 10, 12, 14, 16, 18, 20, 22, 25, 28, 30 |
ТУ 14-1 -248-95: 40P |
||
|
50х6, 7, 8, 10, 12, 16, 20, 25, 28, 30, 32, 36, 40 |
GOST 19281-89: 09Г2,09Г2С, 17Г1С, 10ХСНД |
||
|
56х20, 25, 28, 30, 32, 36 |
GOST 19281-89: 09Г2,09Г2С, 17Г1С, 10ХСНД |
||
|
60х5, 6, 7, 8, 10, 12, 16, 18, 20, 25, 30, 32, 36, 40 |
GOST 19281-89: 09Г2,09Г2С, 17Г1С, 10ХСНД |
||
|
63x5, 6; |
(EN 10058:2003, NEQ; GOST 103-2006, IDT) |
EN 10025-1:2007 (EN 10025-1:2004, IDT), EN 10025-2:2007 (EN 10025-2:2004, IDT): S235 (JO, JR, J2), S275 (JO, JR, J2), S355 (JO, JR, J2) |
|
|
65х6, 7, 8, 10, 11, 12, 15, 20 , 30, 40 |
|||
|
70х5, 6, 7, 10, 18, 25, 30, 40 |
|||
|
75х6, 10, 11, 12, 18, 25 |
|||
|
80х8, 10, 12, 14, 16, 18, 20, 22, 25, 30, 40 |
|||
|
85x12,14, 16, 18, 20, 22, 25 |
|||
|
90х9, 10, 12, 13, 14, 16, 17, 18, 20, 22, 24, 25, 30, 32, 40 |
EN 10083-2: C35, C45 |
Foreign hot-rolled steel strip bar
Dimensions: EU 79-69 and EN 10058: 2003 (Narrow strip) Tolerances: EN 10058: 2003 (Narrow strip)
EU 91-81 Wide strip
Surface requirements: in accordance with EN 10163-3: 2004, class C, subclass 1
|
Dimensions of section, mm |
Product Standard |
Chemical Composition Standard |
Steel Grade |
Length |
|
b x a |
m |
|||
|
"20x4 5 6 7 8 10 12 14 15 |
EN 10025-2: 2004; EN 10058: 2003/EU 79-69; EN 10163-3: 2004 |
EN 10025-2: 2004 |
S235, S355 |
6 |
|
"25x4 5 6 7 8 10 12 14 15 16 18 |
||||
|
"30x4 5 6 7 8 10 12 14 15 16 18 20 |
||||
|
"35x4 5 6 7 8 10 12 14 15 16 18 20 25 |
||||
|
"40x4 5 6 7 8 10 12 14 15 16 18 20 25 30 |
||||
|
"45x4 5 6 7 8 10 12 14 15 16 18 20 25 30 |
||||
|
"50x4 5 6 7 8 10 12 14 15 16 18 20 25 30 35 |
||||
|
"55*x4 5 6 7 8 10 12 14 15 16 18 20 25 30 35 |
||||
|
"60x4 5 6 7 8 10 12 14 15 16 18 20 25 30 35 40 |
||||
|
"65*x 5 6 7 8 10 12 14 15 16 18 20 25 30 35 40 45 |
||||
|
"70x 5 6 7 8 10 12 14 15 16 18 20 25 30 35 40 45 50 |
||||
|
"75*x 5 6 7 8 10 12 14 15 16 18 20 25 30 35 40 |
||||
|
"80x 5 6 7 8 10 12 14 15 16 18 20 25 30 35 40 45 50 |
||||
|
"90x 5 6 7 8 10 12 14 15 16 18 20 25 30 35 40 45 50 |
||||
|
"100x 5 6 7 8 10 12 14 15 16 18 20 25 30 35 40 45 |
||||
|
"110x 5 6 7 8 10 12 14 15 16 18 20 25 30 35 40 |
||||
|
"120x 5 6 7 8 10 12 14 15 16 18 20 25 30 |
||||
|
"130x8 10 12 14 15 16 18 20 25 30 35 40 45 50 60 |
||||
|
"140x8 10 12 14 15 16 18 20 25 30 35 40 45 50 60 |
||||
|
"150x8 10 12 14 15 16 18 20 25 30 35 40 45 50 60 |
||||
|
"160x8 10 12 14 15 16 18 20 25 30 35 40 45 50 60 |
||||
|
"170x8 10 12 14 15 16 18 20 25 30 35 40 45 50 60 |
||||
|
"180*x8 10 12 14 15 16 18 20 |
||||
|
"200*8 10 12 14 15 16 18 20 25 30 35 40 |
Adjusted for adaptation of tolerances for curvature.
The values do not conform to EN 10058:2003.
The section is fairly simple and represents metal strip. Its characteristics are determined by the Standards in force in Ukraine and in the world.
There may vary:
- GOST (103 1976 or 103 2006);
- Basic dimensions (thickness, width, length).
Steel grade
Steel plates. To be bought in industrial quantities.
If you need a reliable partner on purchase of a steel bar in Ukraine and outside its territory, the working together with SPE «TechEnergoProm» LLC will be the best choice. A steel bar is included in the product catalogue available on our website. The range covers all existing types. Each of them differs by the Scope of Applicability.
When manufacturing of a steel bar, the steel of following grades may be used:
- 3СП,
- 20, 20X,
- 40, 40X and others.
The offer of SPE «TechEnergoProm» LLC is the best in the market.
Our work collective is a team of internationally recognized experts in rolled metal products. Sales of rolled metal products is not only gaining of profit for us. We offer the clients our active help in all questions accompanying the purchase.
This means that we not just answer your questions. We go into details of the task and arrange optimal scheme of deliveries and payment. We remain fully responsible for the product quality together with the manufacturer and thus are interested in giving you the best goods being in the market. Our objective is to make every customer a long-standing partner. And we are successful in it.
Satisfied long-established clients gladly recommend us to their partners, and the network of ties is broadening. We are building the community of successful manufacturers and entrepreneurs.
The bases of working relationship for us are mutual advantage, responsibility, quality of products and servicing.
If you want to order rolled metal products at acceptable prices, contact our managers. You will for sure get best advantage from the working relationship with us, and we will be glad to become the long-standing partners of your Company.