facebook
See our channel
Thank you!
Your application has been successfully submitted. In the near future our manager will contact you.

Stainless Steel Pipes

Short description
The stainless steel pipe offers high corrosion resistance as a rule being round- or section-shaped. It is also one of the most popular products of stainless steel. Due to the specificities of this material, the stainless steel pipe is characterized by a small weight. It has an obvious advantage over other metal analogues consisting in the improved bending and torsional resistance indices.
Apply now

The Scope of Applicability of stainless steel pipe is rather wide, for this very reason, it is so popular. It is used in the food, chemical, transport, and other branches of industry. Besides, it is also used in the manufacture of metal products requiring high resistance to corrosion and effect of chemically active substances. The stainless steel pipe is used for laying the engineering systems inside the premises or arrangement of the external lines. One of its priority advantages lies in the fact that it does not exert influence on water condition thus being used for construction of the water supply systems.

ASTM A213. Seamless and Welded Pipes of Austenitic Stainless Steel

Nominal size NPS Outer diameter Limit deviations for the diameter Wall thickness Maximum length
Inch Inch mm mm mm Inch Foot Meter
        1.24 0.049    
1/8 0.405 10.3   1.73 0.068    
        2.41 0.095    
        1.65 0.065    
1/4 0.54 13.7   2.24 0.088    
        3.02 0.119    
        1.65 0.065    
3/8 0.675 17.1   2.31 0.091    
        3.2 0.126    
        1.65 0.065 40 12
        2.11 0.083    
1/2 0.84 21.3   2.77 0.109    
        3.73 0.147    
        1.65 0.065    
        2.11 0.083    
3/4 1.05 26.7   2.87 0.113    
        3.91 0.154    
        1.65 0.065    
      + 0.40; – 0.80 2.77 0.109    
1 1.315 33.4   3.38 0.133    
        4.55 0.18    
        1.65 0.065    
        2.77 0.109    
1 1/4 1.66 42.2   3.56 0.141 30 10
        4.85 0.191    
        2.77 0.109    
1 1/2 1.9 48.3   3.68 0.145    
        5.08 0.201    
        3.91 0.154    
2 2.375 60.3   5.54 0.219    
      ± 0.80 5.16 0.204 23 7
2 1/2 2.875 73   7.01 0.277    
  1. Steel grade: TP 304, TP 304L, TP 316, TP 316L, TP 321.
  2. Random, specified length from 1.5 to 12 m in dependence to the size of pipes.
  3. One-hundred-per-cent nondestructive testing is carried out.
  4. At the Customer’s request, intercrystalline corrosion resistance test is carried out.
  5. It is possible to deliver pipes of other sizes within the limits of range specified in GOST 9941-81.
  6. The ultrasonic testing is carried out instead of the hydraulic pressure test.

PIPES OF CORROSION-RESISTANT STEEL

GOST 9941-81. Seamless Cold- and Warm-Deformed Tubes of Corrosion-Resistant Steel

Outer diameter, mm Wall thickness, mm
0.2 0.3 0.4 0.5 0.6 0.8 1 1.2 1.4 1.5 1.8 2 2.2 2.5
Weight per running meter, kg
5 5.5 0.03 0.05 0.06 0.07 0.08 0.1              
6 0.03 0.04 0.06 0.07 0.08 0.1 0.12 0.14 0.16 0.17        
7 0.03 0.05 0.07 0.08 0.09 0.12 0.15 0.17 0.19 0.2        
8 0.04 0.06 0.07 0.09 0.11 0.14 0.17 0.2 0.23 0.24 0.28 0.3    
9 0.04 0.06 0.08 0.1 0.12 0.16 0.2 0.23 0.26 0.28 0.32 0.35    
10 0.05 0.07 0.09 0.12 0.14 0.18 0.22 0.26 0.3 0.31 0.36 0.39 0.42 0.46
11 0.05 0.08 0.1 0.13 0.15 0.2 0.25 0.29 0.33 0.35 0.41 0.44 0.48 0.52
12 0.06 0.09 0.11 0.14 0.17 0.22 0.27 0.32 0.37 0.39 0.45 0.49 0.53 0.59
13 0.06 0.09 0.12 0.15 0.18 0.24 0.3 0.35 0.4 0.43 0.5 0.54 0.59 0.65
14 0.07 0.1 0.13 0.17 0.2 0.26 0.32 0.38 0.44 0.46 0.54 0.59 0.64 0.71
15 0.07 0.11 0.14 0.18 0.21 0.28 0.35 0.41 0.47 0.5 0.59 0.64 0.69 0.77
16 0.08 0.12 0.15 0.19 0.23 0.3 0.37 0.44 0.5 0.54 0.63 0.69 0.75 0.83
17 0.08 0.12 0.16 0.2 0.24 0.32 0.39 0.47 0.54 0.57 0.67 0.74 0.8 0.89
18 0.09 0.13 0.17 0.22 0.26 0.34 0.42 0.5 0.57 0.61 0.72 0.79 0.86 0.96
19 0.09 0.14 0.18 0.23 0.27 0.36 0.44 0.53 0.61 0.65 0.76 0.84 0.91 1.02
20 0.1 0.15 0.19 0.24 0.29 0.38 0.47 0.56 0.64 0.68 0.81 0.89 0.97 1.08
21   0.15 0.2 0.25 0.3 0.4 0.49 0.59 0.68 0.72 0.85 0.94 1.02 1.14
22   0.16 0.21 0.27 0.32 0.42 0.52 0.62 0.71 0.76 0.9 0.99 1.07 1.2
23   0.17 0.22 0.28 0.33 0.44 0.54 0.65 0.75 0.8 0.94 1.04 1.13 1.26
24   0.18 0.23 0.29 0.35 0.46 0.57 0.67 0.78 0.83 0.99 1.09 1.18 1.33
25   0.18 0.24 0.3 0.36 0.48 0.59 0.7 0.81 0.87 1.03 1.13 1.24 1.39
27   0.2 0.26 0.33 0.39 0.52 0.64 0.76 0.88 0.94 1.12 1.23 1.35 1.51
28   0.2 0.27 0.34 0.41 0.54 0.67 0.79 0.92 0.98 1.16 1.28 1.4 1.57
30   0.22 0.29 0.36 0.44 0.58 0.72 0.85 0.99 1.05 1.25 1.38 1.51 1.7
32   0.23 0.31 0.39 0.46 0.62 0.76 0.91 1.06 1.13 1.34 1.48 1.62 1.82
34   0.25 0.33 0.41 0.49 0.65 0.81 0.97 1.13 1.2 1.43 1.58 1.73 1.94
35   0.26 0.34 0.43 0.51 0.67 0.84 1 1.16 1.24 1.47 1.63 1.78 2
36     0.35 0.44 0.52 0.69 0.86 1.03 1.19 1.28 1.52 1.68 1.83 2.07
38     0.37 0.46 0.55 0.73 0.91 1.09 1.26 1.35 1.61 1.78 1.94 2.19
40     0.39 0.49 0.58 0.77 0.96 1.15 1.33 1.42 1.7 1.87 2.05 2.31
42     0.41 0.51 0.61 0.81 1.01 1.21 1.4 1.5 1.78 1.97 2.16 2.44
45     0.44 0.55 0.66 0.87 1.09 1.3 1.51 1.61 1.92 2.12 2.32 2.62
48     0.47 0.59 0.7 0.93 1.16 1.38 1.61 1.72 2.05 2.27 2.48 2.81
50     0.49 0.61 0.73 0.97 1.21 1.44 1.68 1.79 2.14 2.37 2.59 2.93
51       0.62 0.75 0.99 1.23 1.47 1.71 1.83 2.18 2.42 2.65 2.99
53       0.65 0.78 1.03 1.28 1.53 1.78 1.9 2.27 2.52 2.76 3.11
54       0.66 0.79 1.05 1.31 1.56 1.82 1.94 2.32 2.56 2.81 3.17
56       0.68 0.82 1.09 1.36 1.62 1.89 2.02 2.41 2.66 2.92 3.3
57       0.7 0.83 1.11 1.38 1.65 1.92 2.05 2.45 2.71 2.97 3.36
60       0.73 0.88 1.17 1.45 1.74 2.02 2.16 2.58 2.86 3.14 3.54
63                   2.27 2.72 3.01 3.3 3.73
65                   2.35 2.81 3.11 3.41 3.85
68                   2.46 2.94 3.26 3.57 4.04
70                   2.53 3.03 3.35 3.68 4.16
73                   2.64 3.16 3.5 3.84 4.35
75                   2.72 3.25 3.6 3.95 4.47
                             
                             
Outer diameter, mm Wall thickness, mm and limit deviations
2.8 3 3.2 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5
Weight per running meter, kg
14 0.77 0.81                        
15 0.84 0.89                        
16 0.91 0.96                        
17 0.98 1.04                        
18 1.05 1.11 1.17 1.25                    
19 1.12 1.18 1.25 1.34                    
20 1.19 1.26 1.33 1.42 1.58                  
21 1.26 1.33 1.4 1.51 1.68                  
22 1.33 1.41 1.48 1.6 1.78                  
23 1.39 1.48 1.56 1.68 1.87                  
24 1.46 1.55 1.64 1.77 1.97                  
25 1.53 1.63 1.72 1.86 2.07 2.27                
27 1.67 1.78 1.88 2.03 2.27 2.5                
28 1.74 1.85 1.96 2.11 2.37 2.61                
30 1.88 2 2.11 2.29 2.56 2.83 3.08 3.32            
32 2.02 2.15 2.27 2.46 2.76 3.05 3.33 3.59            
34 2.15 2.29 2.43 2.63 2.96 3.27 3.58 3.87            
35 2.22 2.37 2.51 2.72 3.06 3.38 3.7 4            
36 2.29 2.44 2.59 2.81 3.16 3.5 3.82 4.14            
38 2.43 2.59 2.75 2.98 3.35 3.72 4.07 4.41 4.73          
40 2.57 2.74 2.9 3.15 3.55 3.94 4.32 4.68 5.03          
42 2.71 2.89 3.06 3.32 3.75 4.16 4.56 4.95 5.33          
45 2.91 3.11 3.3 3.58 4.04 4.49 4.93 5.36 5.77          
48 3.12 3.33 3.54 3.84 4.34 4.83 5.3 5.76 6.21 6.65 7.08 7.49    
50 3.26 3.48 3.69 4.01 4.54 5.05 5.55 6.04 6.51 6.97 7.42 7.86    
51 3.33 3.55 3.77 4.1 4.64 5.16 5.67 6.17 6.66 7.13 7.6 8.05    
53 3.47 3.7 3.93 4.27 4.83 5.38 5.92 6.44 6.95 7.45 7.94 8.42    
54 3.54 3.77 4.01 4.36 4.93 5.49 6.04 6.58 7.1 7.61 8.11 8.6    
56 3.67 3.92 4.17 4.53 5.13 5.71 6.29 6.85 7.4 7.93 8.46 8.97    
57 3.74 3.99 4.25 4.62 5.23 5.83 6.41 6.98 7.55 8.09 8.63 9.16 9.7  
60 3.95 4.22 4.48 4.88 5.52 6.16 6.78 7.39 7.99 8.58 9.15 9.71 10  
63 4.16 4.44 4.72 5.14 5.82 6.49 7.15 7.8 8.43 9.06 9.67 10.26 11  
65 4.29 4.59 4.88 5.31 6.02 6.71 7.4 8.07 8.73 9.38 10.01 10.63 11 10.79
68 4.5 4.81 5.11 5.57 6.31 7.05 7.77 8.48 9.17 9.86 10.53 11.19 12 11.42
70 4.64 4.96 5.27 5.74 6.51 7.27 8.01 8.75 9.47 10.18 10.88 11.56 12 11.84
73 4.85 5.18 5.51 6 6.81 7.6 8.38 9.16 9.91 10.66 11.39 12.11 13 12.47
75 4.99 5.33 5.67 6.17 7 7.82 8.63 9.43 10.21 10.98 11.74 12.48 13 12.89
76   5.4 5.74 6.26 7.1 7.93 8.75 9.56 10.36 11.14 11.91 12.67 13 13.52
80   5.7 6.06 6.6 7.5 8.38 9.25 10.1 10.95 11.78 12.6 13.41 14 13.94
83   5.92 6.3 6.86 7.79 8.71 9.62 10.51 11.39 12.26 13.12 13.96 15 14.15
85   6.07 6.46 7.03 7.99 8.93 9.86 10.78 11.69 12.58 13.46 14.33 15 14.99
89   6.36 6.77 7.38 8.38 9.38 10.36 11.33 12.28 13.22 14.15 15.07 16 15.62
90   6.44 6.85 7.47                   16.04
95   6.81 7.24 7.9 8.98 10.04 11.1 12.14 13.17 14.19 15.19     16.87
108         10.26 11.49 12.7 13.9 15.09 16.27 17.43 18.59 20  
110         10.46 11.71 12.95 14.17 15.39 16.59 17.78 18.96 20  

 

  1. Steel grades 10X17H13M2T, 08X18H12T, 12X18H12T, 08X18H10T, and 12X18H10T, 08X17H15M3T
  2. The pipes of steels grades 08X13, 12X13, 10X23H18, 12X17, 08X17T, 08X18H10, and 15X25T, 68X22H6T are manufactured 5-89 x 0.5-8.5 mm in size
  3. The pipes of steels grades 12X17, 08X17T, and 15X25T are manufactured with the outer diameter of 21 mm at least.
  4. The pipes of other sizes and other steel grades may be manufactured after additional agreement.

GOST 9940-81. Seamless Hot-Deformed Tubes Made of Corrosion Resistant Steel

Outer diameter,  mm Wall thickness, mm 
5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 11.0 12.0
Weight per running meter, kg
83 9.62 10.51 11.39 12.26 13.12 13.96 14.80 15.62 16.42 17.22 18.00 19.53 21.01
89 10.36 11.33 12.28 13.22 14.15 15.07 15.98 16.87 17.76 18.62 19.48 21.16 22.79
95 11.10 12.14 13.17 14.19 15.19 16.18 17.16 18.13 19.09 20.03 20.96 22.79 24.56
102 11.96 13.09 14.20 15.31 16.40 17.48 18.54 19.60 20.64 21.67 22.69 24.68 26.63
108 12.70 13.90 15.09 16.27 17.43 18.59 19.73 20.86 21.97 23.08 24.17 26.31 28.41
114     15.98 17.23 18.47 19.70 20.91 22.11 23.30 24.48 25.65 27.94 30.18
121     17.02 18.35 19.68 20.99 22.29 23.58 24.86 26.12 27.37 29.84 32.26
127     17.90 19.31 20.71 22.10 23.48 24.84 26.19 27.53 28.85 31.47 34.03
133     18.79 20.28 21.75 23.21 24.66 26.10 27.52 28.93 30.33 33.09 35.81
140     19.83 21.40 22.96 24.51 26.04 27.56 29.07 30.57 32.06 34.99 37.88
146     20.71 22.36 23.99 25.62 27.22 28.82 30.41 31.98 33.54 36.62 39.65
152     21.60 23.32 25.03 26.73 28.41 30.08 31.74 33.38 35.02 38.25 41.43
159     22.64 24.44 26.24 28.02 29.79 31.55 33.29 35.02 36.74 40.15 43.50
Outer diameter, mm Wall thickness, mm
13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 22.0 24.0 25.0 26.0
Weight per running meter, kg
83 22.44 23.82                    
89 24.36 25.89                    
95 26.29 27.96 29.59 31.17                
102 28.53 30.38 32.18 33.93                
108 30.46 32.45 34.40 36.30                
114 32.38 34.52 36.62 38.67                
121 34.62 36.94 39.21 41.43 43.60 45.72 47.79 49.81 53.71      
127 36.55 39.01 41.43 43.80 46.11 48.38 50.60 52.77 56.96 60.96 62.88 64.76
133 38.47 41.08 43.65 46.16 48.63 51.05 53.41 55.73 60.22 64.51 66.58 68.60
140 40.71 43.50 46.24 48.93 51.56 54.15 56.69 59.18 64.02 68.65 70.90 73.09
146 42.64 45.57 48.46 51.29 54.08 56.82 59.50 62.14 67.27 72.20 74.60 76.94
152 44.56 47.64 50.68 53.66 56.59 59.48 62.32 65.10 70.53 75.76 78.30 80.79
159 46.80 50.06 53.27 56.42 59.53 62.59 65.60 68.55 74.33 79.90 82.61 85.27
  1. Steel grades 08X13, 08X17T, 12X13, 12X17, 15X28, 15X25T, 04X18H10, 10X23H18, 08X18H10T, 08X18H12T, 10X17H13M2T, 12X18H9, 12X18H10T, 12X18H12T, 17X18H9, 08X18H10.
  2. Length of pipes from 1.5 to 8.0 m.
  3. Specific length – by agreement.
  4. The pipes being subjected to control of yield strength and mechanical properties at the temperature of 3500 °C, having undergone the flattening, expansion, intercrystalline corrosion resistance tests and ultrasonically tested are delivered after additional agreement. 
  5. The pipes of steel grades 08X13, 12X13, 12X17, 08X17T, 10X23H18, 15X25T, 10X17H13M2T are manufactured with the minimum wall thickness of 8 mm.
  6. The pipes with the wall thickness less than 8 mm are manufactured with the inner surface being bored.

GOST 10498-82. Especially Thin-Walled Seamless Tubes of Corrosion-Resistant Steel

Outer diameter, mm Wall thickness, mm
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Weight per running meter, kg
4 0.019 0.027 0.036 0.043          
4.5 0.021 0.031 0.040 0.049          
5 0.024 0.035 0.045 0.055          
5.5 0.026 0.038 0.050 0.062          
6 0.029 0.042 0.055 0.068          
6.5 0.031 0.046 0.060 0.074 0.087 0.100      
7 0.034 0.050 0.065 0.080 0.095 0.109      
7.5 0.036 0.053 0.070 0.086 0.102 0.117      
8 0.038 0.057 0.075 0.092 0.109 0.126      
8.5 0.041 0.061 0.080 0.099 0.117 0.135      
9 0.043 0.064 0.085 0.105 0.124 0.143      
9.5 0.046 0.068 0.090 0.111 0.132 0.152      
10 0.048 0.072 0.095 0.117 0.139 0.161      
10.5 0.051 0.075 0.100 0.123 0.146 0.169 0.191 0.213 0.234
11 0.053 0.079 0.105 0.129 0.154 0.178 0.201 0.224 0.247
11.5 0.056 0.083 0.109 0.136 0.161 0.186 0.211 0.235 0.259
12 0.058 0.087 0.114 0.142 0.169 0.195 0.221 0.246 0.271
12.5 0.061 0.090 0.119 0.148 0.176 0.204 0.231 0.257 0.284
13 0.063 0.094 0.124 0.154 0.183 0.212 0.241 0.269 0.296
13.5 0.066 0.098 0.129 0.160 0.191 0.221 0.251 0.280 0.308
14 0.068 0.101 0.134 0.166 0.198 0.230 0.260 0.291 0.321
14.5 0.071 0.105 0.139 0.173 0.206 0.238 0.270 0.302 0.333
15 0.073 0.109 0.144 0.179 0.213 0.247 0.280 0.313 0.345
15.5 0.075 0.112 0.149 0.185 0.220 0.255 0.290 0.324 0.358
16 0.078 0.116 0.154 0.191 0.228 0.264 0.300 0.335 0.370
16.5 0.080 0.120 0.159 0.197 0.235 0.273 0.310 0.346 0.382
17 0.083 0.124 0.164 0.203 0.243 0.281 0.320 0.357 0.395
17.5 0.085 0.127 0.169 0.210 0.250 0.290 0.329 0.368 0.407
18 0.088 0.131 0.174 0.216 0.257 0.299 0.339 0.380 0.419
18.5 0.090 0.135 0.179 0.222 0.265 0.307 0.349 0.391 0.432
19 0.093 0.138 0.183 0.228 0.272 0.316 0.359 0.402 0.444
19.5 0.095 0.142 0.188 0.234 0.280 0.325 0.369 0.413 0.456
20 0.098 0.146 0.193 0.240 0.287 0.333 0.379 0.424 0.469
20.5 0.100 0.149 0.198 0.247 0.294 0.342 0.389 0.435 0.481
21 0.103 0.153 0.203 0.253 0.302 0.350 0.399 0.446 0.493
21.5 0.105 0.157 0.208 0.259 0.309 0.359 0.408 0.457 0.506
22 0.108 0.161 0.213 0.265 0.317 0.368 0.418 0.468 0.518
22.5 0.110 0.164 0.218 0.271 0.324 0.376 0.428 0.479 0.530
23 0.112 0.168 0.223 0.277 0.331 0.385 0.438 0.490 0.543
23.5 0.115 0.172 0.228 0.284 0.339 0.394 0.448 0.502 0.555
24 0.117 0.175 0.233 0.290 0.346 0.402 0.458 0.513 0.567
24.5 0.120 0.179 0.238 0.296 0.354 0.411 0.468 0.524 0.580
25 0.122 0.183 0.243 0.302 0.361 0.419 0.477 0.535 0.592
25.5   0.186 0.248 0.308 0.368 0.428 0.487 0.546 0.604
26   0.190 0.253 0.314 0.376 0.437 0.497 0.557 0.617
26.5   0.194 0.257 0.321 0.383 0.445 0.507 0.568 0.629
27   0.198 0.262 0.327 0.391 0.454 0.517 0.579 0.641
27.5   0.201 0.267 0.333 0.398 0.463 0.527 0.590 0.653
28   0.205 0.272 0.339 0.405 0.471 0.537 0.601 0.666
28.5   0.209 0.277 0.345 0.413 0.480 0.546 0.613 0.678
29   0.212 0.282 0.351 0.420 0.489 0.556 0.624 0.690
29.5   0.216 0.287 0.358 0.428 0.497 0.566 0.635 0.703
30   0.220 0.292 0.364 0.435 0.506 0.576 0.646 0.715
30.5   0.223 0.297 0.370 0.442 0.514 0.586 0.657 0.727
31   0.227 0.302 0.376 0.450 0.523 0.596 0.668 0.740
31.5   0.231 0.307 0.382 0.457 0.532 0.606 0.679 0.752
32   0.235 0.312 0.388 0.465 0.540 0.616 0.690 0.764
32.5   0.238 0.317 0.395 0.472 0.549 0.625 0.701 0.777
33   0.242 0.322 0.401 0.479 0.558 0.635 0.712 0.789
33.5   0.246 0.326 0.407 0.487 0.566 0.645 0.724 0.801
34   0.249 0.331 0.413 0.494 0.575 0.655 0.735 0.814
34.5   0.253 0.336 0.419 0.502 0.583 0.665 0.746 0.826

GOST 10498-82. Especially Thin-Walled Seamless Tubes of Corrosion-Resistant Steel

Outer diameter, mm Wall thickness, mm
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Weight per running meter, kg
35 0.257 0.341 0.425 0.509 0.592 0.675 0.757 0.838
35.5 0.260 0.346 0.432 0.516 0.601 0.685 0.768 0.851
36 0.264 0.351 0.438 0.524 0.609 0.694 0.779 0.863
36.5 0.268 0.356 0.444 0.531 0.618 0.704 0.790 0.875
37 0.272 0.361 0.450 0.539 0.627 0.714 0.801 0.888
37.5 0.275 0.366 0.456 0.546 0.635 0.724 0.812 0.900
38 0.279 0.371 0.462 0.553 0.644 0.734 0.823 0.912
38.5 0.283 0.376 0.469 0.561 0.653 0.744 0.834 0.925
39 0.286 0.381 0.475 0.568 0.661 0.754 0.846 0.937
39.5 0.290 0.386 0.481 0.576 0.670 0.763 0.857 0.949
40 0.294 0.391 0.487 0.583 0.678 0.773 0.868 0.962
40.5 0.297 0.396 0.493 0.590 0.687 0.783 0.879 0.974
41 0.301 0.400 0.499 0.598 0.696 0.793 0.890 0.986
41.5 0.305 0.405 0.506 0.605 0.704 0.803 0.901 0.999
42 0.308 0.410 0.512 0.613 0.713 0.813 0.912 1.011
42.5 0.312 0.415 0.518 0.620 0.722 0.823 0.923 1.023
43 0.316 0.420 0.524 0.627 0.730 0.833 0.934 1.036
43.5 0.320 0.425 0.530 0.635 0.739 0.842 0.945 1.048
44 0.323 0.430 0.536 0.642 0.747 0.852 0.957 1.060
44.5 0.327 0.435 0.543 0.650 0.756 0.862 0.968 1.073
45 0.331 0.440 0.549 0.657 0.765 0.872 0.979 1.085
45.5 0.334 0.445 0.555 0.664 0.773 0.882 0.990 1.097
46 0.338 0.450 0.561 0.672 0.782 0.892 1.001 1.110
46.5 0.342 0.455 0.567 0.679 0.791 0.902 1.012 1.122
47 0.345 0.460 0.573 0.687 0.799 0.911 1.023 1.134
47.5 0.349 0.465 0.580 0.694 0.808 0.921 1.034 1.147
48 0.353 0.470 0.586 0.701 0.816 0.931 1.045 1.159
48.5 0.357 0.474 0.592 0.709 0.825 0.941 1.056 1.171
49 0.360 0.479 0.598 0.716 0.834 0.951 1.068 1.184
49.5 0.364 0.484 0.604 0.724 0.842 0.961 1.079 1.196
50 0.368 0.489 0.610 0.731 0.851 0.971 1.090 1.208
50.5 0.371 0.494 0.617 0.738 0.860 0.980 1.101 1.221
51 0.375 0.499 0.623 0.746 0.868 0.990 1.112 1.233
51.5 0.379 0.504 0.629 0.753 0.877 1.000 1.123 1.245
52 0.382 0.509 0.635 0.761 0.886 1.010 1.134 1.258
52.5 0.386 0.514 0.641 0.768 0.894 1.020 1.145 1.270
53 0.390 0.519 0.647 0.775 0.903 1.030 1.156 1.282
53.5 0.394 0.524 0.653 0.783 0.911 1.040 1.167 1.295
54 0.397 0.529 0.660 0.790 0.920 1.050 1.179 1.307
54.5 0.401 0.534 0.666 0.798 0.929 1.059 1.190 1.319
55 0.405 0.539 0.672 0.805 0.937 1.069 1.201 1.332
55.5 0.408 0.544 0.678 0.812 0.946 1.079 1.212 1.344
56 0.412 0.548 0.684 0.820 0.955 1.089 1.223 1.356
56.5 0.416 0.553 0.690 0.827 0.963 1.099 1.234 1.369
57 0.419 0.558 0.697 0.834 0.972 1.109 1.245 1.381
57.5 0.423 0.563 0.703 0.842 0.980 1.119 1.256 1.393
58 0.427 0.568 0.709 0.849 0.989 1.128 1.267 1.406
58.5 0.431 0.573 0.715 0.857 0.998 1.138 1.278 1.418
59 0.434 0.578 0.721 0.864 1.006 1.148 1.289 1.430
59.5 0.438 0.583 0.727 0.871 1.015 1.158 1.301 1.443
60 0.442 0.588 0.734 0.879 1.024 1.168 1.312 1.455
63     0.771 0.923 1.075 1.227 1.378 1.529
65     0.795 0.953 1.110 1.267 1.423 1.578
68     0.832 0.997 1.162 1.326 1.489 1.652
70     0.857 1.027 1.196 1.365 1.534 1.702
73     0.894 1.071 1.248 1.424 1.600 1.776
75     0.919 1.101 1.283 1.464 1.645 1.825
80       1.175 1.369 1.562 1.756 1.948
83       1.219 1.421 1.622 1.822 2.022
85       1.249 1.455 1.661 1.867 2.071
90       1.323 1.541 1.760 1.977 2.195
95       1.397 1.628 1.858 2.088 2.318
  1. Steel grade: 06X18H10T, 09X18H10T, 08X18H10T
  • Random length: 0.5 to 8.0 m;
  • Multiple length: 0.5 to 5.0 m;
  • Minimum multiple length: 100 mm;
  • Specified length: 0.5 to 5.0 mm
  1. It is possible to deliver pipes with the outer (with the diameter being no more than 48 mm) and the inner (with the diameter being no less than 10 mm) surfaces being electrochemically polished
  1. The pipes with the diameter of 60 mm and over are delivered without heat treatment, straightening and after additional agreement.
Interested in stainless steel pipes?
Interested in stainless steel pipes?
Write to us
Apply now
Tehenergoprom TV